Network hardware interfaces  > Apple pinouts
This connector supports thick coaxial cable with the use of an optional transceiver (not available from Apple). The interface cards covered in this table include The EtherTalk Interface Card and EtherTalk NB Card.
Pin Signal Description
1 Shield  
2 Collision presence +  
3 Transmit +  
4 Reserved  
5 Receive +  
6 Power return  
7 Reserved  
8 Reserved  
9 Collision presence -  
10 Transmit -  
11 Reserved  
12 Receive -  
13 Power  
14 Reserved  
15 Reserved  
 
15 pin D-SUB male connector layout
15 pin D-SUB male connector
at the Apple card cable, looking into cable-side connector
15 pin D-SUB female connector layout
15 pin D-SUB female connector
at the Apple computer
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Source(s) of this and additional information: Apple "Ports and Pinouts"
This page contain parts under Copyright © 2000-2018 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Old.Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.