A serial cable is a cable used to transfer information between two devices using a serial communication protocol. The form of connectors depends on the particular serial port used. A cable wired for connecting two DTEs directly is known as a null modem cable.
or follow to 16 MODERN hardware pinouts.
or follow to 16 MODERN hardware pinouts.
- LapLink serial cables Will work with LapLink from Travelling Software
- Linker DTE 25 pin Serial cable
- Serial Printer (25-25) cable Use this cable between two devices - a computer (DTE) and a printer (DCE)
- Two-Wire modem (25-25) cable This cable should be used for DTE to DCE (for instance computer to modem) connections without hardware handshaking.
- Two-Wire modem (9-25) cable This cable should be used for DTE to DCE (for instance computer to modem) connections without hardware handshaking.
- X.21 DB25 to DB15
Apple Pinouts
- Apple 300/1200 modem
- Apple Duo Dock modem adapter Card 10 pin unknown connector
- Apple ImageWriter Serial
- Apple LaserWriter AppleTalk
- Apple LaserWriter Serial
- Apple serial NB card
- Mac to C64 Nullmodem cable The RS-232 on the C64 is a little bit strange. It uses inverted TTL level of signals. The RS-422 ports on the Macintosh has both an inverted and non-inverted input By using the inverted instead of non-inverted the inverted C64 level is back to normal
- Macintosh modem (With DTR) cable This cable should be used for DTE to DCE (for instance computer to modem) connections with DTR.
- Macintosh modem (Without DTR) cable This cable should be used for DTE to DCE (for instance computer to modem) connections without DTR
- Phase I Macintosh modem cable
- Phase I PC modem cable
- Phase II Macintosh modem cable
- Phase II PC modem cable
- Ricochet SE Macintosh modem cable
- Ricochet SX Macintosh modem cable
Cisco Pinouts
- Cisco X.21 DCE cable (DB-60 to DB-15) This document describes the X.21 cable assembly and pinouts (Data Communications - DCE). Cisco Part#: CAB-X21FC=
- Cisco X.21 DTE cable (DB-60 to DB-15) This document describes the X.21 cable assembly and pinouts (Data Terminal Equipment - DTE). Cisco Part#: CAB-X21MT=
Conrad Pinouts
- Conrad Electronics MM3610D This connector is available on the Conrad Electronics Multimeter 3610D and is used to connect it to a computer.
HP Pinouts
obsolete computers Pinouts
- GSM Modem Maestro 20/100 Fargo Telecom Wismo Maestro 20 Maestro 100 GSM GPRS modem 900 / 1800
- Ricochet SE PC modem cable
- Ricochet SX PC modem cable
- RocketPort Serial (25) cable Use this cable to connect a RocketPort serialport card to a modem.
- RocketPort Serialport Available at RocketPort serialport expansion cards.
- Serial Speedster Seems to be available at a 14.4kbps modem called Speedster.
- Speedster modem cable This cable should be used to connect an internal 14.4kbps Speedster modem to a computer.
