Obsolete hardware connectors pinouts

Serial (SGI MiniDIN) pinout

serial interface

bookmark this page
8 pin mini-DIN female connector layout
8 pin mini-DIN female connector
at the computer

Mini-DIN-8 serial port connectors are found on the Personal IRIS 4D/30, 4D/35, Indigo, Indy, and Indigo2. Most of other SGI workstation uses standard PC serial pinout.

Pin Name Dir Description
1DTR-->Data Terminal Ready
2CTS<--Clear to Send
3TXD-->Transmit Data
4GND---System Ground
5RXD<--Receive Data
6RTS-->Request to Send
7CD<--Carrier Detect
8GND---System Ground
Note: Direction is DTE (Computer) relative DCE (Modem)

Is there anything to be corrected? Edit this page!
Source(s) of this and additional information: Egon Kastelijn
This information should be correct, but we are not sure.
Is this document CORRECT or INCORRECT?.
Pinouts.ru >  RS-232 and other serial ports and interfaces pinouts listing >  Pinout of Serial (SGI MiniDIN) and layout of 8 pin mini-DIN female connector. Is this document correct or incorrect?
Is it correct?:
unknown
no visitors comments
Last updated 2011-08-18 14:47:26. Edit this page.
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2010 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
[an error occurred while processing this directive]