Obsolete hardware connectors pinouts

Apple IIc to Imagewriter II printer pinout

cable wiring

bookmark this page

This cable will allow you to connect the Apple IIc to the Apple Imagewriter II printer

Device 1
DIN Pin Number
Device 1
Apple Pin Number *
Device1
Pin Name
Direction Device 2
Pin Number
Device 2
Pin Name
Description (may be empty)
1 1 HSKo -> 2 HSKi Handshaking
4 2 TxD -> 5 RxD- Data
2 3 GND   4,8 GND,RxD+ Ground 
5 4 RxD <- 3 TxD- Data 
3 5 HSKi <- 1 HSKo Handshaking

  The Imagewriter's pin 6 and 7 are not used.  This is equivalent to the Apple IIc Peripheral-8 Cable (A2C4312.)

 

*  Please note:  Apple's numbering scheme for its' DIN-5 ports do not follow the DIN specification.  Both are provided for convenience.


Is there anything to be corrected? Edit this page!
Contributor(s): matthew becherer, matthew becherer
This information should be correct, but we are not sure.
Is this document CORRECT or INCORRECT?.
Pinouts.ru >  Parallel interfaces and ports cables schemes >  Pinout of Apple IIc to Imagewriter II printer. Is this document correct or incorrect?
Is it correct?:
should be correct
1 comments
Last updated 2011-08-10 16:19:34. Edit this page.
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2010 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
[an error occurred while processing this directive]