Obsolete hardware connectors pinouts

Parallel (Amiga) pinout

parallel interface

bookmark this page
25 pin D-SUB female connector layout
25 pin D-SUB female connector
at the Amiga

Pin Name Dir Description
1 /STROBE --> Strobe
2 D0 <-> Data Bit 0
3 D1 <-> Data Bit 1
4 D2 <-> Data Bit 2
5 D3 <-> Data Bit 3
6 D4 <-> Data Bit 4
7 D5 <-> Data Bit 5
8 D6 <-> Data Bit 6
9 D7 <-> Data Bit 7
10 /ACK <-- Acknowledge
11 BUSY <-> Busy
12 POUT <-> Paper Out
13 SEL <-> Select (Shared with RS232 RING-indicator)
14 +5V PULLUP --> +5 Volts DC (10 mA max)
15 n/c - Not connected.
16 /RESET --> Reset
17 GND --- Signal Ground
18 GND --- Signal Ground
19 GND --- Signal Ground
20 GND --- Signal Ground
21 GND --- Signal Ground
22 GND --- Signal Ground
23 GND --- Signal Ground
24 GND --- Signal Ground
25 GND --- Signal Ground
Note: Direction is Computer relative Peripheral

Is there anything to be corrected? Edit this page!
Source(s) of this and additional information: Amiga 4000 User"s Guide from Commodore, from Hardware Book
This information should be correct, but we are not sure.
Is this document CORRECT or INCORRECT?.
Pinouts.ru >  Parallel interfaces pinouts >  Pinout of Parallel (Amiga) and layout of 25 pin D-SUB female connector. Is this document correct or incorrect?
Is it correct?:
unknown
no visitors comments
Last updated 2011-08-10 16:19:34. Edit this page.
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2010 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
[an error occurred while processing this directive]