Pinouts >  Распиновки параллельных портов  >  obsolete computers pinouts
25 pin D-SUB male connector layout
Разъем 25 pin D-SUB male
Pin Name Dir Description
1/STROBE-->Strobe
2D0<->Data Bit 0
3D1<->Data Bit 1
4D2<->Data Bit 2
5D3<->Data Bit 3
6D4<->Data Bit 4
7D5<->Data Bit 5
8D6<->Data Bit 6
9D7<->Data Bit 7
10/ACK<--Acknowledge
11BUSY<->Busy
12POUT<->Paper Out
13SEL<->Select (Shared with RS232 RING-indicator)
14GND---Signal Ground
15GND---Signal Ground
16GND---Signal Ground
17GND---Signal Ground
18GND---Signal Ground
19GND---Signal Ground
20GND---Signal Ground
21GND---Signal Ground
22GND---Signal Ground
23+5V-->+5 Volts DC (10 mA max)
24n/c-Not connected.
25/RESET-->Reset
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Источник(и) этой и дополнительной информации: Amiga 4000 User"s Guide from Commodore, from Hardware Book
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.