Obsolete hardware connectors pinouts

Amstrad CPC6128 Printer port pinout

parallel interface

bookmark this page
35 pin EDGE connector layout
35 pin EDGE connector
at the computer

Pin Name Description
1/STROBEStrobe
2D0Data 0
3D1Data 1
4D2Data 2
5D3Data 3
6D4Data 4
7D5Data 5
8D6Data 6
9GNDGround
10n/cNot connected
11BUSYBusy
12n/cNot connected
13n/cNot connected
14GNDGround
15n/cNot connected
16n/cNot connected
17n/cNot connected
16GNDGround
17n/cNot connected
19GNDGround
20GNDGround
21GNDGround
22GNDGround
23GNDGround
24GNDGround
25GNDGround
26GNDGround
27n/cNot connected
28GNDGround
29n/cNot connected
30n/cNot connected
31n/cNot connected
32n/cNot connected
33GNDGround
34n/cNot connected
35n/cNot connected
Note: Pin 18 does not exist

Is there anything to be corrected? Edit this page!
Source(s) of this and additional information: Amstrad CPC6128 User Instructions Manual, from Hardware Book, Agnello Guarracino
This information should be correct, but we are not sure.
Is this document CORRECT or INCORRECT?.
Pinouts.ru >  Parallel interfaces pinouts >  Pinout of Amstrad CPC6128 Printer port and layout of 35 pin EDGE connector. Is this document correct or incorrect?
Is it correct?:
unknown
no visitors comments
Last updated 2011-08-10 16:19:34. Edit this page.
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2010 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
[an error occurred while processing this directive]