Obsolete hardware connectors pinouts

MSX joystick pinout

connector or cable wiring scheme

bookmark this page
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the computer

Pin Name Dir Description
1/FORWARD<--Forward
2/BACK<--Backward
3/LEFT<--Left
4/RIGHT<--Right
5+5V-->+5 VDC (50mA max)
6/TRG1<->Trigger A / Output 1
7/TRG2<->Trigger A / Output 1
8OUTPUT-->Output 3
9GND---Signal Ground
Note: Direction is Computer relative joystick.
Warning: Pin 5 is +5V on MSX and Mouse Button 2 on Amiga. Since Amiga mousebutton is active low, connecting an Amiga mouse to a MSX and pressing mousebutton 2 will shortcut the supply voltage

Is there anything to be corrected? Edit this page!
9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the joystick cable
Source(s) of this and additional information: Mayer"s SV738 X"press I/O map, from Hardware Book
This information should be correct, but we are not sure.
Is this document CORRECT or INCORRECT?.
Pinouts.ru >  Input devices (keyboards, mices, joysticks) pinouts >  Pinout of MSX joystick and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connector. Is this document correct or incorrect?
Is it correct?:
unknown
no visitors comments
Last updated 2011-08-10 16:19:34. Edit this page.
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2010 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
[an error occurred while processing this directive]