Obsolete hardware connectors pinouts

External SCSI D-Sub (Future Domain) pinout

hard drive connector

bookmark this page
25 pin D-SUB female connector layout
25 pin D-SUB female connector
at the controller

Seems to be available on some Future Domain SCSI-controllers only.

Pin Name Dir Description
1 GND --- Ground
2 DB1 <-> Data Bus 1
3 DB3 <-> Data Bus 3
4 DB5 <-> Data Bus 5
5 DB7 <-> Data Bus 7
6 GND --- Ground
7 /SEL <-> Select
8 GND --- Ground
9 TMPWR <-> Termination Power
10 /RST <-> Reset
11 C/D --> Control/Data
12 I/O --> Input/Output
13 GND --- Ground
14 DB0 <-> Data Bus 0
15 DB2 <-> Data Bus 2
16 DB4 <-> Data Bus 4
17 DB6 <-> Data Bus 6
18 PARITY <-> Data Parity
19 GND --- Ground
20 /ATN <-- Attention
21 /MSG --> Message
22 /ACK <-- Acknowledge
23 BSY <-> Busy
24 /REQ --> Request
25 GND --- Ground
Note: Direction is Device relative Bus (other Devices)

Is there anything to be corrected? Edit this page!
25 pin D-SUB male connector layout
25 pin D-SUB male connector
at the cable
This information should be correct, but we are not sure.
Is this document CORRECT or INCORRECT?.
Pinouts.ru >  HDD connectors pinouts >  Pinout of SCSI External D-Sub (Future Domain) and layout of 25 pin D-SUB female connector and 25 pin D-SUB male connector. Is this document correct or incorrect?
Is it correct?:
unknown
no visitors comments
Last updated 2011-10-08 22:22:20. Edit this page.
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2010 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
[an error occurred while processing this directive]