HDD and other storage devices connectors
This connector is mostly used for 2.5 IDE HDD of laptops and some other device. Equal to ATA (44) connector, except 50 pin connector used.

Although there are 50 pins in the plug, the mating receptacle need contain only 44 pins (the removal of pins 5 and 6 provides room for the wall of the receptacle). The first four pins of the connector plug located on the device are not to be connected to the host, as they are reserved for manufacturers use. Pins 5, 6 are keys, and are removed.

Pin Name Dir Description
1     Vendor specific
2     Vendor specific
3     Vendor specific
4     Vendor specific
5     keypin
6     keypin

Note: Direction is Controller relative Devices (harddisks).

50 pin IDC male connector layout
50 pin IDC male connector
at the controller & peripherals
50 pin IDC female connector layout
50 pin IDC female connector
at the cable
According to 4 reports in our database (1 positive and 1 negative) this pinout may be incorrect.

Is this pinout
Source(s) of this and additional information: Sci.Electronics FAQ: Repair: Pinouts FAQ
This page contain parts under Copyright © 2000-2018 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Old.Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.