Разъемы сотовых телефонов и смартфонов  > Nokia pinouts
Pinouts for the 10 Pin connector on both the types of LCD?s (green PCB and brown PCB)
Pin Pin
1 VDD 3.3 V LCD Power
2 Reset ?
3 SDATA Serial Data (Synchronous data - can use SPI port on Microchip PIC MCUs)
4 SCLK Serial Clock
5 CS Chip Select
6 VLCD 3.3V LCD Power
7 NC Not connected
8 GND LCD Power
9 LED- (0V) Backlight LED Cathode
10 LED+ (6V) Backlight LED Anode

The connector on the LCD Module used in Nokia 6610 phones. Also applicable to Chinese LCD remakes sold as replacement parts (on SparkFun website http://www.sparkfun.com/commerce/product_info.php?products_id=569 etc.) This 10 pin connector is used on both types of Color LCDs - the green PCB and brown PCB. View the pictures of the connector as well as how to solder the contacts yourself. http://robinbigsmile.spaces.live.com/photos/cns!1C97694BF9FB109B!129/

10 pin unspecified схематический вид разъема
Разъем 10 pin unspecified
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
This page contain parts under Copyright © 2000-2018 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Old.Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.