Hardware pinouts information and cables schemes

PC Gameport (Joystick) specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 15 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
CORRECTAPPROVED
CORRECTAPPROVED
CORRECTThanks!APPROVED
2009-02-08 02:56:42rev. 2CORRECTAPPROVED
2009-08-06 16:31:14rev. 4INCORRECTThis is not very important due to the symmetry of the pinout, but the half of the pinout are inverted (button 3 and 4 ?).APPROVED
2012-12-15 01:41:12rev. 4CORRECTThere are a lot of grammatical errors. APPROVED
2013-06-26 03:02:39rev. 4ERROR FIXEDThe internal potentiometers are connected between GROUND and 5V, not left unconnected. Unconnected doesn't form a circuit as the "sense" is high impedance.APPROVED
2014-02-10 23:21:52rev. 6INCORRECTUnder 'Joystick position' it describes 'are connected between GROUND and 5V'. The joysticks are not connected to ground, only the buttons are.APPROVED
2014-09-19 08:47:27rev. 6CORRECTAPPROVED
2015-06-07 12:18:06rev. 6CORRECTeverything looks good, keep it up! TheEdvinazardAPPROVED
2016-03-16 02:25:09rev. 6CORRECTAPPROVED
2016-12-18 21:35:04rev. 6CORRECTAPPROVED
2017-12-23 10:00:44rev. 7CORRECTспасибоAPPROVED
2019-07-14 23:50:00rev. 7CORRECTAPPROVED
2020-04-24 23:38:27rev. 8ERROR FIXEDPin 10 should be named "/B3" Pin 14 should be named "/B4"APPROVED


History of users contributions

Date Content
Revision
Author Comment
2010-05-17 20:35:30rev. 4Dicedtypo's, and grammar

Back to PC Gameport (Joystick) pinout


Pinouts.ru > Pinout of PC Gameport (Joystick) and layout of 15 pin D-SUB female connector and 15 pin D-SUB male connector
should be correct