Pinouts >  Распиновки разъемов видеокарт компьютера
20 pin MDR20 female connector layout
Разъем 20 pin MDR20 female

The DFP connector is a 20 pin connector. It and the DVI connector carry the same type of digital signal (TMDS). The DFP connector was created before the DVI, by VESA, and is only designed to carry digital video, so there is no provision to carry analog.

Pin Signal
1 TMDS Data 1 +
2 TMDS Data 1 ?
3 Ground
4 Ground
5 TMDS Data C +
6 TMDS Data C ?
7 Ground
8 +5V
9 Reserved
10 Reserved
11 TMDS Data 2 +
12 TMDS Data 2 -
13 Ground
14 Ground
15 TMDS Data 0 +
16 TMDS Data 0 -
17 Reserved
18 Reserved
19 DDC Data
20 DDC Clock


 

Signal type: digital. DDC = Display Data Channel. T.M.D.S. = Transition Minimized Differential Signal.

На распиновку DFP-compliant MDR-20 есть 1 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
Источник(и) этой и дополнительной информации: Matrox G200 Flat Panel Add-On - User Guide
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.