Pinouts >  VGA, DVI, S-Video and other video connectors  >  obsolete computers pinouts
23 pin D-SUB male connector layout
23 pin D-SUB male connector
Pin Name Dir Description
1 /XCLK <-- Extern Clock
2 /XCLKEN <-- Extern Clock Enable (47 Ohm)
3 RED --> Analog Red (75 Ohm)
4 GREEN --> Analog Green (75 Ohm)
5 BLUE --> Analog Blue (75 Ohm)
6 DI --> Digital Intensity (47 Ohm)
9 DR --> Digital Red (47 Ohm)
8 DG --> Digital Green (47 Ohm)
7 DB --> Digital Blue (47 Ohm)
10 /CSYNC --> Composite Sync (47 Ohm)
11 /HSYNC --> Horizontal Sync (47 Ohm)
12 /VSYNC --> Vertical Sync (47 Ohm)
13 GNDRTN --- Digital Ground (for /XCLKEN) Dont connect with pin 16-20.
14 /PIXELSW --> Genlock overlay (47 Ohm)
15 /C1 --> Clock out (47 Ohm)
16 GND --- Video Ground for RED Analog (useful to know because some TVs need specific grounds for specific colors when using SCART/PERITEL SECAM video signal)
17 GND --- Video Ground for GREEN Analog
18 GND --- Video Ground for BLUE Analog
19 GND --- Video Ground for CHV SYNC
20 GND --- Video Ground
21 -12V --> -12 Volts DC (10 mA max) (A500/A600/A1200)
  -5V --> -5 Volts DC (10 mA max) (A1000/A2000/A3000/A4000)
22 +12V --> +12 Volts DC (100 mA max)
23 +5V --> +5 Volts DC (100 mA max)

Note: Direction is Computer relative monitor.

 


DETAILS FOR MAKING UP A CABLE FOR AMIGA 23-PIN VDU OUTPUT TO AMIGA VGA MONITOR

==============================================================================

END “A1” - THE AMIGA CPU OUTPUT FOR VDU MONITOR IS DB23 MALE SOCKET ON AMIGA CHASSIS

END “B1” - AMIGA MONITOR VDU INPUT IS AN IN-LINE 15-PIN RGB MALE SOCKET ON THE END OF A GROMMETED CABLE BUILT INTO THE VDU CHASSIS

 

THE CABLE TO JOIN THESE ENDS IS AS FOLLOWS

------------------------------------------

END “A2” - FEMALE DB23 PLUG
END “B2” - FEMALE VGA 15 pin = 3 rows (not 2 row D-type)

 

“A1” PLUGS INTO “A2”

“B1” PLUGS INTO “B2”

 

AMIGA CPU to AMIGA VGA MONITOR - CABLE CONNECT

----------------------------------------------

END “A2”      END “B2”

Amiga RGB      VGA RGB

 3 Red Sig      1 Red Sig

 4 Green Sig    2 Green Sig

 5 Blue Sig      3 Blue Sig

19 Video Gnd    5 Gnd

16 Reg Gnd      6 Red Gnd

17 Green Gnd     7 Green Gnd

18 Blue Gnd      8 Blue Gnd

20 Sync Gnd    10 Sync Gnd

11 H Sync       13 H Sync

12 V Sync      14 V sync




According to 8 reports in our database (5 positive and 2 negative) the Amiga video pinout should be correct.

Is this pinout
Source(s) of this and additional information: Commodore 4000 User"s Guide from Commodore, from Hardware Book, updated by Zone
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings