Pinouts >  Распиновки последовательных портов
10 pin IDC male connector layout
Разъем 10 pin IDC male
at the component side of the PCI card
The Rosewill Serial/LPT PCI card (RC-303) with the GD75232 UART (Serial) to PC chip. This pinout is the Serial connector pins on the card (JP2&JP3). Pin 1 is marked by an arrow on the card. They follow the standard IDC number scheme. Odd pins bottom row, Even pins top row.

 Other Numbers on the PCI card are: SH194V-0 and E248779

Pin 1 is marked by an arrow on the card.
They follow the standard IDC number scheme. Odd pins bottom row, Even pins top row.

Pin
Number		 Pin
Name		 Description (may be empty)
1 DCD Pin1 on D-SUB male connector
2 RXD Pin2 on D-SUB male connector
3 TXD Pin3 on D-SUB male connector
4 DTR Pin4 on D-SUB male connector
5 GRND Pin5 on D-SUB male connector
6 DSR Pin6 on D-SUB male connector
7 RTS Pin7 on D-SUB male connector
8 CTS Pin8 on D-SUB male connector
9 RI Pin9 on D-SUB male connector
10 NA Not Connected/Not Needed 

 

Статус распиновки: +0 -1
На распиновку Rosewill RC-303 Serial/LPT PCI Card - RS232/Serial есть 1 отзыв(а): 0 положительных и 1 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: http://focus.ti.com/lit/ds/symlink/gd75232.pdf
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings