Pinouts >  Распиновки последовательных портов  >  Apple pinouts
25 pin D-SUB male connector layout
Разъем 25 pin D-SUB male
at the computer
Pin Name Dir Description
1SNG---Shield ground
2TXD-->Tx Transmit Data, Out
3RCD<--Rx Receive Data, In
4RTS-->Request to Send, Out
5CTS<--Clear to Send, In
6DSR<--Data Set Ready, In
7GND---Ground
8DCD<--Data Carrier Detect, In
9n/c No connection
10n/c No connection
11n/c No connection
12CH<--Data signal rate selector, In
13n/c No connection
14n/c No connection
15n/c No connection
16n/c No connection
17n/c No connection
18n/c No connection
19n/c No connection
20DTR-->Terminal Ready Signal, Out
21n/c No connection
22CE<--Ring indicator, In
23n/c No connection
24n/c No connection
25n/c No connection
Статус распиновки: +0 -0
На распиновку AppleLine RS232 есть 1 отзыв(а): 0 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: Apple Tech Info Library 1184: AppleLine Pinouts at Apple TIL homepage, from Hardware Book
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings