Pinouts >  Распиновки последовательных портов  >  obsolete computers pinouts
25 pin D-SUB male connector layout
Разъем 25 pin D-SUB male
at the computer
Pin Name Dir Description
1SHIELD---Shield Ground
2TXD-->Transmit Data
3RXD<--Receive Data
4RTS-->Request to Send
5CTS<--Clear to Send
6DSR<--Data Set Ready
7GND---System Ground
8CD<--Carrier Detect
9+12V-->+12 Volts DC (20 mA max)
10-12V-->-12 Volts DC (20 mA max)
11AUDO-->Amiga Audio Out (Left)
12n/c-Speed Indicate
13n/c- 
14n/c- 
15n/c- 
16n/c- 
17n/c- 
18AUDI<--Amiga Audio In (Right)
19n/c- 
20DTR-->Data Terminal Ready
21n/c- 
22RI<--Ring Indicator
23n/c- 
24n/c- 
25n/c- 
Note: Direction is DTE (Computer) relative DCE (Modem).
Note: Do not connect SHIELD(1) to GND(7).
25 pin D-SUB female connector layout
Разъем 25 pin D-SUB female
at the cable
Статус распиновки: +1 -0
На распиновку Serial (Amiga) есть 1 отзыв(а): 1 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: Amiga 4000 User"s Guide from Commodore, from Hardware Book
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings