Pinouts >  Распиновки последовательных портов  >  DEC pinouts
25 pin D-SUB male connector layout
Разъем 25 pin D-SUB male
at the computer
Found on the DEC Multia and DEC UDB (Universal Desktop Box). It contains two Serial ports on one connector. The 1st port is located on the normal pins, and the 2nd port is located on some "spare" pins.
Pin Port Name Dir Description
1   n/c   Not connected
2 1 TXD --> Transmit Data (RS232)
3 1 RXD <-- Receive Data
4 1 RTS --> Ready To Send
5 1 CTS <-- Clear To Send
6 1 DSR <-- Data Set Ready
7 1+2 GND - Ground
8 1 DCD <-- Data Carrier Detect
9   n/c   Not connected
10   n/c   Not connected
11 2 DTR --> Data Terminal Ready
12 2 DCD <-- Data Carrier Detect
13 2 CTS <-- Clear To Send
14 2 TXD --> Transmit Data
15   n/c   Not connected
16 2 RXD <-- Receive Data
17   n/c   Not connected
18   n/c   Not connected
19 2 RTS --> Ready To Send
20 1 DTR --> Data Terminal Ready
21   n/c   Not connected
22 1 RI <-- Ring Indicator
23 2 DSR <-- Data Set Ready
24   n/c   Not connected
25 2 RI <-- Ring Indicator

Note: Direction is DTE (Computer) relative DCE (Modem).

Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: Tommy"s pinout Collection by Tommy Johnson; Digital UDB Information by Eric Smith, from Hardware Book
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings