Pinouts >  ATX, WTX and other standard and proprietary power supply (PSU) cables connectors  >  Zenith pinouts
9 pin mini-DIN male proprietary connector layout
9 pin mini-DIN male proprietary connector
at the Power supply out
Zenith ZA-300-3 Power supply pinout. Compatible with zenith laptops models: ZWL-300, ZWL-300-X, ZWL-300-XX, ZWL-400, ZWL-400-X, ZWL-400-XX, IWL-300, IWL-300-X, IWL-400 and IWL-400-X

 

Pin
Number		 Pin
Name		 Description (may be empty)
1 VCC  +14v DC
2 VCC  +14v DC
3 GND  Ground
4 GND  Ground
5   ?
6   ?
7   ?
8 GND Ground
9   ?

One of the free pins (5,6,7,9) should carry a battery level signal, but I can't test. You can leave the pins free and the computer will start and should charge battery.

Thanks to penguin86 and Xtremehardware for the testing.

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Source(s) of this and additional information: http://www.xtremehardware.it/forum/f89/pinouts_schemi_di_connettori_cavi_e_adattatori-18355/#post207048
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings