Pinouts >  PDA, Tablet PC, MP3 players and other portable devices  >  Creative pinouts

30 pins connector
The pinout should fit 1 device(s)/model(s). Click to list>
Pin
Name		 Pin
Number		 Description
1 GND Ground
2 D+ USB 3
3 D- USB 2
4 VBus USB 1
5 ID USB 4
6 N/A empty
7 BT_CTL Control pin for the navigation buttons. Different resistor values push different buttons.
8 N/A empty
9 N/A empty
10 N/A empty
11 GND Ground
12 N/A empty
13 5 VDC + USB Power 5 VDC (+)
14 5 VDC + USB Power 5 VDC (+)
15 5 VDC + USB Power 5 VDC (+)
16 5 VDC + USB Power 5 VDC (+)
17 R1 10k ohm
18 GND R1 Groun/ combined and connected to Ground to other side of R1
19 GND R1 Ground/combined and connected to Ground to other side of R1
20 GND RCA 1-2-3 ground Video Ground
21 N/A empty
22 N/A empty
23 GND Ground
24 RCA 1 - Signal Audio L
25 GND Ground
26 RCA 3 - Signal Audio R
27 GND Ground
28 Switch (Normally closed [grounded])(Open when AV cable is inserted)
29 N/A empty
30 RCA 2 - Signal Video

 

Pinout status: +2 -1
According to 4 reports in our database (2 positive and 1 negative) the Creative Zen Vision:M dock pinout should be correct.

Is this pinout
NO DIY devices
Source(s) of this and additional information: http://www.anythingbutipod.com/archives/2006/
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings