Pinouts >  PDA, Tablet PC, MP3 players and other portable devices  >  Handspring pinouts

4 pins connector at the battery
The Handspring Visorphone was a cellular phone attachment marketed for the Handspring Visor series of handhelds. After Handspring's merger with Palm in 2003, it became difficult to obtain replacements.
The pinout should fit 1 device(s)/model(s). Click to list>
Pin
Number		 Pin
Name		 Description
1 GND Ground
2 TEMP Stops charging if battery temperature becomes too high
3 Vin Lithium-ion battery, 3.6v
4   Not connected

Pin 1 is closest to the center of the battery; Pin 4 is closest to the edge of the battery.

According to Handspring's specifications, 4 to 6 volts can be applied across Vin to charge the battery.

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Copyright © 2000-2023 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.