Pinouts >  Распиновки параллельных портов
50 pin D-SUB male connector layout
Разъем 50 pin D-SUB male
Pin Return Dir Description Active State
22 6 <-- Ready High
21 5 <-- On Line High
23 7 <-- Demand High
38 37 --> Data Strobe High
19 3 --> Data 1 n/a
20 4 --> Data 2 n/a
1 2 --> Data 3 n/a
41 40 --> Data 4 n/a
34 18 --> Data 5 n/a
43 42 --> Data 6 n/a
36 35 --> Data 7 n/a
28 44 --> Data 8 n/a
29 13 --> Parity n/a
50 32 <-- Ident 0 n/a
49 16 <-- Ident 1 n/a
46 45 --> Interface Verify. Tied together. Low?
12 39 --> +5 VDC (Test) High
27 11 <-- Parity Error High
25 9 <-- Bottom of Form High
24 8 <-- Top of Form High
30 14 --> Paper Instruction High
31 15 --> Buffer Clear High
26 10 <-- Paper Moving High
48 17 <-- Paper Moving High
47 33 <-- Not VFU High
Note: Direction is Host (Computer) relative Peripheral (Printer).
Note: Return is Ground signal for Unbalanced and the Negative Signal for Balanced.
50 pin D-SUB female connector layout
Разъем 50 pin D-SUB female
Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: Hardware Book
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings