Pinouts >  Parallel interfaces  >  obsolete computers pinouts
24 pin DZM 12 DREH connector layout
24 pin DZM 12 DREH connector
at the C64 UserPort
Requires a cartridge with Centronics support (TFCIII or ActionReplay.)
  C64 Dir Printer  
GND 1,12,A,N --- 19-30,33 Ground
FLAG2 B <-- 10 Acknowledge
PB0 C --> 2 Data 0
PB1 D --> 3 Data 1
PB2 E --> 4 Data 2
PB3 F --> 5 Data 3
PB4 H --> 6 Data 4
PB5 J --> 7 Data 5
PB6 K --> 8 Data 6
PB7 L --> 9 Data 7
PA2 M --> 1 Strobe
/Reset 3 --> 31 Initialize Printer

 

36 pin CENTRONICS male connector layout
36 pin CENTRONICS male connector
at the Printer
Pinout status: +1 -0
According to 1 reports in our database (1 positive and 0 negative) the C64 Centronics Printer cable pinout should be correct.

Is this pinout
NO DIY devices
Source(s) of this and additional information: CBM Memorial Page Pinouts, pinout by Roy Kannady, from Hardware Book, http://www.hardwarebook.info/C64/128_User_Port
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings