Pinouts >  HDD and other storage devices connectors
25 pin D-SUB female connector layout
25 pin D-SUB female connector
at the controller
Pin Name Dir Description
1 /REQ --> Request
2 /MSG --> Message
3 I/O --> Input/Output
4 /RST <-> Reset
5 /ACK <-- Acknowledge
6 BSY <-> Busy
7 GND --- Ground
8 DB0 <-> Data Bus 0
9 GND --- Ground
10 DB3 <-> Data Bus 3
11 DB5 <-> Data Bus 5
12 DB6 <-> Data Bus 6
13 DB7 <-> Data Bus 7
14 GND --- Ground
15 C/D --> Control/Data
16 GND --- Ground
17 /ATN <-- Attention
18 GND --- Ground
19 /SEL <-> Select
20 PARITY <-> Data Parity
21 DB1 <-> Data Bus 1
22 DB2 <-> Data Bus 2
23 DB4 <-> Data Bus 4
24 GND --- Ground
25 TMPWR <-> Termination Power

Note: Direction is Device relative Bus (other Devices). Total length of all SCSI cables should not exceed 20 feet (6 meters).

25 pin D-SUB male connector layout
25 pin D-SUB male connector
at the cable
Pinout status: +4 -0
According to 4 reports in our database (4 positive and 0 negative) the SCSI External D-Sub (PC/Amiga/Apple Macintosh) pinout should be correct.

Is this pinout
NO DIY devices
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings