A Macintosh 800K External Drive or an Apple 3.5 Drive can be connected to the Macintosh 512K enhanced, Plus, SE, SE/ 30, Classic, Classic II/Performa 200, IIcx, IIci, IIsi, Portable, and IIvi/IIvx/Performa 600.
Ports and Pinouts External Floppy Drive Connector: DB-19 - 23 Connect an Apple SuperDrive to a Macintosh SE (FDHD upgrade), SE/30, Classic, Classic II, IIcx, IIci, IIsi, Portable, and IIvi/IIvx/Performa 600.
Connect a Hand Disk 20 to a Macintosh 512K, 512K enhanced, Plus, and SE.
Pin | Name | Dir | Description |
---|---|---|---|
1 | CGND | Chassis ground | |
2 | CGND | Chassis ground | |
3 | CGND | Chassis ground | |
4 | CGND | Chassis ground | |
5 | -12V | -12 VDC | |
6 | +5V | +5 VDC | |
7 | +12V | +12 VDC | |
8 | +12V | +12 VDC | |
9 | n/c | - | Not connected |
10 | PWM | ? | Regulates speed of the drive |
11 | CA0 | ? | Control line to send commands to the drive |
12 | CA1 | ? | Control line to send commands to the drive |
13 | CA2 | ? | Control line to send commands to the drive |
14 | LSTRB | ? | Control line to send commands to the drive |
15 | WrReq- | ? | Turns on the ability to write data to the drive |
16 | HdSel | ? | Control line to send commands to the drive |
17 | Enbl2- | ? | Enables the Rd line (else Rd is tristated) |
18 | Rd | Data actually read from the drive | |
19 | Wr | Data actually written to the drive |