Pinouts >  HDD and other storage devices connectors  >  obsolete computers pinouts
14 pin DIN male connector layout
14 pin DIN male connector
at the diskdrive
Pin (DIN numbering) Pin (Atari numbering) Name Description
6 1 RD Read Data
7 2 SIDE0 Side 0 Select
5 3 GND Ground
8 4 INDEX Index
4 5 SEL0 Drive 0 Select
9 6 SEL1 Drive 1 Select
3 7 GND Ground
10 8 MOTOR Motor On
2 9 DIR Direction In
11 10 STEP Step
1 11 WD Write Data
14 12 WG Write Gate
12 13 TRK00 Track 00

13

 14 WP Write Protect
 
Schematic uses DIN PIN numbering. Atari chose a different way to count the pins, which give a more direct maping to the usual Shugart standard wires.
Note there isn't any way to detect READY or DISK CHANGE signals on this connector.
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Source(s) of this and additional information: Hardware Book, Lawrence Wright, Steve & Sally Blair, http://info-coach.fr/atari/hardware/interfaces.php
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings