Pinouts >  Mobile Phones and Smartphones connectors  >  Samsung pinouts
19 pin Samsung PDA proprietary connector layout
19 pin Samsung PDA proprietary connector
The pinout should fit 6 device(s)/model(s). Click to list>
Pin Signal Description
3 GND shorted by R=44.5KOhm to pin 18 when keyboard attached
4 Rx also Tx for keyboard
5 Tx  
8 Ri  
9 CTS  
10 DTR  
11 DSR  
16 Vcc power +5V, VDD for keyboard, +4.2V charging by i700 12V charger
17 GND  
15   +1.5V charging by i700 12V charger
18   +0.66V charging by i700 12V charger
19   +6V charging by i700 12V charger

i700 Audio Jack Pinouts
tip = mike
ring = left audio
base = ground
outer ring = right audio
 

Samsung I700 charger (should show charger icon when connected). NOT tested!
2 - R1=120k to pin 3
3 - GND
4 - +V (4.3V-4.6V, not more)
5 - R2=2.2k to pin 4
 

Original charger is TCH120ESE

Pinout status: +2 -1
According to 3 reports in our database (2 positive and 1 negative) the Samsung i700, i730, i830, i600, i550, i500 data and headset cable connector pinout should be correct.

Is this pinout
NO DIY devices
Source(s) of this and additional information: Serial Secrets for PocketPC"s
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings