Pinouts >  Mobile Phones and Smartphones connectors  >  Chinese clones pinouts
11 pin HTC ExtUSB jack connector layout
11 pin HTC ExtUSB jack connector
HTC Chineese clone headphones adaptor (tested on T3238+)

 

Pin Number Pin Name
1 +5V
2 -Data
3 +Data
4  
5 GND
6  
7 Antenna
8  
9  
10 Left
11 Right
GND LG,RG

I needed to make myself an 3.5mm adaptor to hook up my earphones. As I have HTC clone, original pinout haven't worked for me. So one day I decided to find out myself. Success-Failure method uncovered bit different pinout of the clone. Hope Stal-ker won't mind me using his previous schematics. This schematics will work with T3238+ clone (mine has PXA300 CPU), but as there might be more versions of the phone (even tough it's said that MoBo's are mostly the same) it might not work on other clones (T4242 etc.). Don't have any to test it on. All is on your risk! (but for me it works)

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Source(s) of this and additional information: Measurement and testing on the phone.
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings