Pinouts >  Aftermarket automotive Head units and Car Stereo  >  Philips pinouts
26 (10+8+8) pin ISO 10487 Head Unit / Car Audio connector layout
26 (10+8+8) pin ISO 10487 Head Unit / Car Audio connector

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

B+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
A+ Ignition powered. +12 V with the ignition key is in the ACC or ON position.
lightbulb image Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

SDA, SCL, MRQ Head unit communication (information display and so on)

 

There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings