Pinouts >  Aftermarket automotive Head units and Car Stereo  >  Philips pinouts
26 (10+8+8) pin ISO 10487 Head Unit / Car Audio connector layout
26 (10+8+8) pin ISO 10487 Head Unit / Car Audio connector

Accessory power and +12v lines are switched.

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

B+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
A+ Ignition powered. +12 V with the ignition key is in the ACC or ON position.
 lightbulb image Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on.
ANT+, P.ANT, ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

Mut This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
SDV This pin is used in some radio equipment to automatically boost up the volume. It needs the output from the speed sensor.
SDA, SCL, MRQ Head unit communication (information display and so on)

 

According to 1 reports in our database (0 positive and 0 negative) this pinout may be incorrect.

Is this pinout
Copyright © 2000-2020 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to Old.Pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.