Pinouts >  OEM Lexus and Toyota in-Car Radio and Navigation units  >  Toyota pinouts
12 pin Toyota Head Unit CD Changer connector layout
12 pin Toyota Head Unit CD Changer connector
at the car stereo
p/n 86120-0C040
The pinout should fit 9 device(s)/model(s). Click to list>

Rear Right and Rear Left (-) are at pin 20?

Head unit pinout signals explained

Pin
Notation		 Pin function

Power pins
B+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins
FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
Right+ Rear right speaker out
Left+ Rear left speaker out
Lin Line out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins
T/M This pin is used to silence the audio, earthed by some other external components that is connected to the radio.

Toyota CDX-M9406 ZT

 

20 pin Toyota Head Unit audio connector layout
20 pin Toyota Head Unit audio connector
Pinout status: +0 -1
According to 2 reports in our database (0 positive and 1 negative) the Toyota 1999-2002 A56817 Head Unit pinout may be incorrect.

Is this pinout
NO DIY devices
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings