Pinouts >  OEM Lexus and Toyota in-Car Radio and Navigation units  >  Toyota pinouts
16 pin (10+6) Toyota Head Unit proprietary connector layout
16 pin (10+6) Toyota Head Unit proprietary connector
also for , CQ-JS8280AAT/ABT, CQ-JT1010X, CQ-JT6910X, CQ-LS8180A, CQ-LS8181A, CQ-LT1010X, CQ-LT1180TA, CQ-MS0170F/L, CQ-MS0270K, CQ-MS0370K, CQ-MS0371K, CQ-LS7160K, CQ-LS1010X

Head unit pinout abbreviations

Pin
Notation		 Pin function

Power pins
BAT+ Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC+ Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins
FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

12 pins connector
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
1 Information source(s)
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings