Pinouts >  OEM Lexus and Toyota in-Car Radio and Navigation units  >  Lexus pinouts
16 pin (10+6) Toyota Head Unit proprietary connector layout
16 pin (10+6) Toyota Head Unit proprietary connector
at the head unit
P1714 PIONEER KEX-M9086zt (86120-48050)
The pinout should fit 1 device(s)/model(s). Click to list>

Head unit pinout abbreviations

Pin
Notation		 Pin function

Power pins
B Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on.

Audio pins
FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL- The corresponding speaker ground

Misc. pins
MUTE This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
Amp Amplifier control
CD-IN L+, CD-IN L-, CD-IN R+, CD-IN R- CD-changer audio

 

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
1 Information source(s)
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings