Pinouts >  OEM Lexus and Toyota in-Car Radio and Navigation units  >  Lexus pinouts

22 pins connector
p/n 86120-60380
The pinout should fit 2 device(s)/model(s). Click to list>

Pin
Notation		 Pin function

Power pins
BU Battery+  (12V direct from Battery). 
GND, GROUND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 

Audio pins
FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins
MUTE This pin is used to silence the audio, earthed by some other external components that is connected to the radio.

May be for 86120-60381, 86120-60340, 86120-60380, 86120-60382 part numbers

Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
1 Information source(s)
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings