Pinouts >  Genuine Subaru and Suzuki car audio harness  >  Suzuki pinouts

4 pins connector

Pin Pin function
Bup Battery+  (12V direct from Battery). 
GND Chassis Ground
ACC Ignition powered. +12 V with the ignition key is in the ACC or ON position.
ILL Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on. May be used for backlight adjustment in some models.
ANT Power for Electric Antenna. Output +12 V (maximum 150 - 300mA) 
FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground
Rem Remote control

 


4 pins connector
Pinout status: +1 -0
According to 1 reports in our database (1 positive and 0 negative) the Suzuki Swift pinout should be correct.

Is this pinout
NO DIY devices
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings