Pinouts >  Mercedes-Benz, Smart OEM Car audio harness  >  Mercedes-Benz pinouts
36 (20+8+8) pin Head Unit / Car Stereo ISO connector layout
36 (20+8+8) pin Head Unit / Car Stereo ISO connector
Grundig

Head unit pinout abbreviations

Pin
Notation
Pin function

Power pins

KL.30 Battery+  (12V direct from Battery). 
GND, GROUND, KL.31 Chassis Ground
KL.15 Ignition powered. +12 V with the ignition key is in the ACC or ON position.
lightbulb image Light-on signal or backlight adjustment. +12V supplied to light-on pin of head unit when tail lights ar turned on.

Audio pins

FR+ or RF+ Front right speaker out
FL+ or LF+ Front left speaker out
RR+ Rear right speaker out
LR+ or  RL+ Rear left speaker out
FR- or RF-, FL- or LF-, RR-, LR- or RL-, SGND The corresponding speaker ground

Misc. pins

strikeout speaker This pin is used to silence the audio, earthed by some other external components that is connected to the radio.
GALA This pin is used in some radio equipment to automatically boost up the volume. It needs the output from the speed sensor.

 

There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings