Pinouts >  Audio / Video hardware connectors  >  Philips pinouts
8 pin mini-DIN male connector layout
8 pin mini-DIN male connector
at the End of controller


 

Pin
Number
Pin
Name
Description
1   NA

not connected

2   RXD

Received Data

3   TXD

Transmitted Data

4

DTR*

  Data Terminal Ready
5  GND   Ground
6   CTS   Clear to Send
7  RTS   Request to Send
8

+5V

 

*DTR is used as a power supply for some input devices and cannot be used as an active handshake signal.

8 pin mini-DIN female connector layout
8 pin mini-DIN female connector
at the Cdi input
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Source(s) of this and additional information: http://www.icdia.co.uk/cdprosupport/hardware/cables/cdi_ser.htm
Copyright © 2000-2019 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to Old.Pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.