Pinouts >  Audio / Video hardware connectors  >  Philips pinouts

20 pins connector at the Philips VCR
The Philips VCRs, V2020, V2021, V2022 & V2023 have a 20-pin A/V connector through which all signals must be connected. Philips provided a breakout box


f you wish to get External Video in to a V2020/1/2/3 then the signal needs to be amplifed and fed to Pin 17. Similarly Video Output from Pin 18 needs to be buffered before it can drive a 75 ohm line.

 

Pin Function
1 External Audio Input.
2 Audio Output. Internal feed to UHF Modulator.
3 +12Vd.c. Output.
4 Test Point for Bias adjustment
5 Camera Remote Out
6 External ON (XON): Goes High when channel 00 is selected.
7 Remote in. (Data via Camera)
8 Voltage Actuator Added.
9 Head to Frame Added Pulse.
10 Ground for Head Frame Added.
11 Muting: Low is no signal applied.
12 NOT REC: Goes low in Record mode,
13 Mute All: Goes low when External Video In is selected.
14 Mute Sound: Goes Low when External Audio In is selected.
15 Playback envelope track sensing. (Envelope Curve)
16 Ground for Pin 15.
17 External Video Input.
18 External Video Output.
19 NOT PB. Goes low in Playback mode.
20 Ground for Pin 1.

 

 
Pinout status: +0 -0
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
NO DIY devices
Source(s) of this and additional information: www.palsite.com
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings