LapLink/InterLink Parallel cable specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 7 approved reports in our database

Date	Content Revision	User opinion	Comment	Approved by moderator?
		CORRECT		APPROVED
		CORRECT	Verified pinout from laplink cable with breakout box and ohmmeter	APPROVED
		CORRECT	WinXP--WinXP direct cable connection work correctly	APPROVED
2009-04-19 23:43:21	rev. 1	CORRECT	Direct cable connectio IBM PS/1 (Dos 4.00) -- Pentium 4 (Dos 6.22) fully working	APPROVED
2010-10-15 01:36:59	rev. 1	CORRECT	Working using NC4 between XT PC and Sempron AM2 PC (DOS 5.0 on both).	APPROVED
2011-11-27 03:40:15	rev. 1	CORRECT	No, correct pinout. I have an original Traveling Software Parallel LapLink cable and I tested it with my multimeter continuity function.	APPROVED
2011-11-27 04:16:16	rev. 1	CORRECT	I have an old Touchstone (Trend) FastMove parallel (red color, not yellow like LapLink)cable that was used with the TouchStone software to move data on parallel Ports link LapLink. The pinout is identical to this pinout except it does not have pin 25 connected at all. Touchstone was old software from the late 1980's and early 1990's. You might want to add this for completeness on you site.	APPROVED

History of users contributions

Date	Content Revision	Author	Comment

Back to LapLink/InterLink Parallel cable pinout

Pinouts.ru > Pinout of LapLink/InterLink Parallel cable and layout of 25 pin D-SUB male connector and 25 pin D-SUB male connector

should be correct