VGA, DVI, S-Video and other video connectors pinouts
Used for RF-modulator usually.
 2  4  6  8 10 12 14 16 18 20 22 24 26 28 30
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 1  3  5  7  9 11 13 15 17 19 21 24 25 27 29
Pin Name Description
1 GND Video Ground
2 GND Video Ground
3 XCLK External Genlock Clock (in)
4 R Red (in to video card)
5 /XCLKEN Enables External Clock on XCLK.
6 BR Buffered Red (out from video card)
7 GND Video Ground
8 G Green (in to video card)
9 GMS0 Genlock mode 0 (from computer, genlock button)
10 BG Buffered Green (out from video card)
11 GMS1 Genlock mode 1 (from computer, genlock button)
12 B Blue (in to video card)
13 /PIXELSW Genlock signal
14 BB Buffered Blue (out from video card)
15 VSYNC Vertical Sync (in to video card)
16 CSYNC Composite Sync (in to video card)
17 HSYNC Horizontal Sync (in to video card)
18 BCSYNC Buffered Composite Sync (out from video card)
19 GND Video Ground
20 AUDR Audio Right Output (from computer to RF modulator)
21 DGND Digital Ground
22 AUDL Audio Left Output (from computer to RF modulator)
23 -12V -12 VDC (can be -5 VDC instead)
24 DGND Digital Ground
25 +12V +12 VDC
26 /CD/TV CD/TV button. (Low=CDTV video on RF, High=Antenna)
27 VCC +5 VDC
28 /CCK 3.58 MHz color clock (C1 clock)
29 GND Video Ground
30 VCC +5 VDC

unknown connector
There are no any reports for this pinout! You may rate this document by clicking the button below.

Is this pinout
Source(s) of this and additional information: Darren Ewaniuk"s CDTV Technical Information, from Hardware Book
This page contain parts under Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Old.Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.